The magnitude of the male dignity worried the representatives of the stronger sex of ancient times.Confirmation of this was found an artificial member who, according to historians, is at least 28,000 years old.It was discovered during archaeological excavations in Germany, a country considered a pioneer and leader in the porn industry.
Today, for changing the size of the penis, it is possible in different methods - from the use of special medicines, the use of ointments and creams, performing stretching, to surgical surgery.However, the nozzles for the genital organ, which can be purchased in both intimacy toys and do it with your own hands become popular.
Is it possible to make a member noise yourself?
The Internet is full of "How to Make an Artificial Rooster with your own hands" requests.The increased interest is simply explained simply: the models presented in the stores are high quality and expensive, and those who have a low cost do not differ in high quality.When you want to try a sex toy, the dilemma is born: Do you need to pay for the goods if there is no trust in its more use?
After all, it may be that the girl will not approve of the presence of the nozzle or cause her discomfort, irritation or pain (the latter is not excluded for men).If you choose a more affordable option, there is a risk of irritation due to a possible allergic reaction of the toy or injury to the genitals due to the broken or exfoliated parts of the nozzle.
It is also possible when you want to try "here and now", but there is no time to wait for an order from the Internet and there is no way to visit the closest sex shop.In such situations, the question of how to make a dildo or nozzle of a member at home is quite up -to -date.
If you consider the product, it is clear that it is quite difficult to design it, but not impossible.The main thing is to have a desire and a little time in time, as well as to buy the necessary materials.It is the latter that will depend on the final quality of the obtained object.The advantage of the home member is that its shape and size will be limited exclusively by the author's imagination.
The choice of the right material
For nozzles and artificial members produced in industrial conditions, use:
- Cybercro is a material almost similar to the true skin of a person.It is soft, delicate, virtually indistinguishable from living flesh, because when it touches the body, it quickly absorbs its temperature and holds it throughout the period of time to stay on the organ.The disadvantage of the material is very susceptible to damage, therefore requires careful handling, washing in warm soapy water, storage in a special case.
- Polyvinyl chloride is a material that is most popular for the production of dildo and sex toys.Its advantages: the ability to quickly undergo the shape of the human body, strength and combination with lubricants.It is washed from PVC with soft cleaning products: soap, shower gel or intimate hygiene, does not require special storage conditions.The application is possible with any frequency and intensity.
- Silicone is a medical material used for the production of intimate goods in 90% of cases.It is soft, flexible and quite elastic.He is able to quickly take the shape of the body and after the "work" to return to its original state.Advantage: Hypoallergenicity that allows the work of all toys of any intensity.Keep silicone nozzles in a dark place, because under the influence of ultraviolet rays it is destroyed.The disadvantage - the games with it require lubrication processing and exclusively based on water.
- The rubber is a specialized type of material with increased thermoplastic properties and convenient to touch.Suitable for creating products that need to be given and maintained.The softness of the material allows them to make them comfortable for both partners and elasticity - to obtain the necessary parameters (length, thickness, ribs, pimples, etc.).The nozzles of a rubber member are not rubbed and do not cause allergic reactions.Non -aggressive detergents or special cleansers for intimate toys are used for care.
- Plastic is a dense material in which special mixtures are added for more softness and elasticity.It is used for the production of nozzles with special shapes.
The choice of material is the most important stage in the production of dildo with your own hands, as the final version of the product and its safety for the health of the two partners depend on it.Therefore, in this case it is extremely undesirable to save.
The types of materials
Before making the phallus at home, you need to clarify which of these materials is available to the manufacturer.Some of them are available in free sale in construction stores, others when ordering via the Internet.
So, for the production of gravity created by the home, they are appropriate:
- alginate massive mass;
- silicone molding table;
- Bending a polyurethane mass.
Other options may be offered in the store, but before you acquire them, you need to find out if the material causes allergic reactions and how safe it is for the body.
Stages of work
How do I do dildo at home?Will be required:
- Flexible transparent plastic;
- adhesive tape (adhesive tape);
- Selected material;
- A food movie.
A square or rectangle is cut from the plastic sheet - depending on which size the product is planned.The length of the sheet is adjusted as desired - the more centimeters it wants to add to itself, the longer this is.The width of the leaf depends on the existing parameters of the penis: in the upright state it must easily enter and have free space.To make a home member to fit in size, it must be:
- Measure it with a centimeter strip;
- Add the required amount of centimeters to the results;
- Cut the desired width.
Error: To wrap the plastic sheet around the penis and cut "by eye" - such a phallus made by you will be either small or too large.
When it is finished with dimensions and cutting, the sheet is inverted with a tube, the joint of the edges is tightly fixed with a strip.The circle is cut from the plastic, which closes one of the holes and is also tightly wrapped with a ribbon.The task is to make the resulting pipe completely tight.
The second stage of the "How to Make Dilde" process is poured.For this upright penis, it is tightly wrapped in a fitting film so that the contact of the body with the body is excluded.If the task is to make a smooth nozzle, you have to wrap it carefully without all possible irregularities, because the smoothness of the interior of the future nozzle will depend on it.
Next, the molding mass is poured into the prepared pipe and the penis is lowered there.The hardening process lasts 15 minutes, after which the structure is removed from the penis.You can now carefully remove the tape and release the product from the plastic frame - home phallus is ready for use.
If the person wants to give an anatomical shape to the toy, this can be done with the help of a knife and abrasive materials.They are easy to prepare different sills, ribs, antennas and other "chips" of nozzles.
Risks
Before you make a member with your own hands from improvised materials, you need to consider serious health risks inherent in home toys for sex:
- Seals, sharp or poorly treated edges, angles, convexity and other defects in a home toy are able to provoke injuries to the genitals of the two partners;
- The incorrectly calculated size threatens the loss of the nozzle in the process of intimacy;A more serious option - it can be stuck in the body of a woman;
- If the calculations are carried out in a state of incomplete erection or have been lost at the time of hardening of the table, there is a risk that it will not work to remove the nozzle without medical care;
- Disruption of tightness when wrapping a member with a film can cause masses in the urethra, which will cause an inflammatory process or blockage of the urethra;
- Holding a member in full erection for 15 minutes is a difficult task for the solution from which men take medicines with phosphodesterase inhibitors with serious side effects for the internal organs.
After evaluating and weighing all possible risks, they are suitable for independent production of vibrators and nozzles responsibly and carefully and all stages are carefully and accurately carried out.
What to make an artificial phallus of
It is easier to make a phaliimitor directly at home, ie.An artificial member.Such toys are preferable to ladies and if the girl wants, she can be left in free possession.For the production of dumplings, they are appropriate:
Plaster
It is sold freely in a construction supermarket, pharmacy or toy store.After preparing the table (the rules for working with the plaster are described in the instructions built into the package), a member of the desired size is shaken, it is allowed to dry completely.Once treated with sandpaper to eliminate all irregularities.Before Love Games, a phallus condom is placed.
The use of a plastic gypsum mixture is also possible for the production of nozzles: for this member, fully erected and wrapped in a film, is covered with a mixture of plaster and allowed to harden.However, such a toy will be very firm and this property causes discomfort, pain, discomfort.Its second drawback is instability.
Silicone mixture
Another filling option is in shape from the previous vibrator.That is, if the toy is already bought (or the package of it accidentally obtained by friends), the silicone mass can be poured into a plastic form, pre -oiled with vegetable oil for free extraction at the end of the work and after stabbing, glue the halves with super glue.
The adhesive is able to provoke the strongest allergy, so games with such an artificial member are recommended only with rubber product # 2.
Wax
This material is available in 90% of cases and anywhere as long as there are advantages:
- Easily take the desired shape;
- It has a characteristic aroma;
- In the absence of allergies to beekeeper blowing, a woman is allowed to be introduced into the body without a condom (it is enough to treat it with fat).
The wax candle is heated, it is given the required length and width size, if you wish, additional stimulating sills, spikes, ribs, etc.
Plate
This children's creativity product can be used in the same way as wax, but it is worth considering that it is more plastic and therefore easily lose its form in the middle of sexual contact.A simple pencil is capable of making a more stable toy placed inside a blurred artificial member or pre -freezing the phallus.
Improvised means
You can make a penis nozzle yourself, but this process is not quick.If the desire of the experiments has arisen suddenly and there are no special toys, you can use improvised means.How can you replace a member?
- Vegetables and fruits.In almost every refrigerator there are gifts of nature that take the shape of a phallic symbol.Ideal and affordable - cucumbers and bananas, which in chilled form will bring their thirst in intimate games.
- Mobile phones.We are talking about small models that can be placed on vibration.
- Electric razor.Previously, the cutting block is removed from it.
The alternative will serve as a comb with a long and wide pen, curls for curling and other things with a phallic shape without sharp angles and protrusions.The basic condition for their application: Rinse in water and place a condom on them.
Games in bed with nozzles, artificial members and lubricants are called to make diversity and sharpness in the couple's daily intimate life.However, before replacing a member with an artificial copy, it is worth coordinating this problem with a lover, otherwise the romantic evening may end sadly: a serious quarrel or a painful vacation.